Vertex Standard VX-110, Руководство по эксплуатации

Страница: 13 / 40

VX-110 O
PERATING
M
ANUAL
11
TOGGLE
: Pressing the
LAMP
switch momentarily “Toggles” the lamp on and off. The
lamp will stay illuminated until you press the
LAMP
switch once more.
Here is the procedure for setting up the Lamp mode:

Press the [
F
] key, then immediately press the [
M/V
(
SET
)] key to activate the Set mode.
‚
Now rotate the DIAL to select Menu Item #19 (“
LMP MOD
”).
ƒ
Press the [ F
] key to enable modification of the current setting.
„
Next, rotate the DIAL to select one of the three modes described above.
When you have made your choice, press the PTT key to save the new setting for Menu
Item #21. The transceiver will now return to normal operation.
A
UTOMATIC
P
OWER
-O
FF
(APO) F
EATURE
The APO feature helps conserve battery life by automatically turning the radio off after a
user-defined period of time within which there has been no dial or key activity. The avail-
able selections for the time before power-off are 0.5/1/3/5/8 hours, as well as APO Off.
The default condition for the APO is OFF, and here is the procedure for activating it:

Press the [
F
] key, then press the [
M/V
(
SET
)] key to enter the Set mode.
‚
Rotate the
DIAL
to select Menu Item #10 (“
APO
”).
ƒ
Press the [
F]
key to enable adjustment of this Menu item.
„
Rotate the
DIAL
to select the desired time period after which the radio will automati-
cally shut down.
Once you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
B
USY
C
HANNEL
L
OCK
-O
UT
(BCLO)
The BCLO feature prevents the radio’s transmitter from being activated if a signal strong
enough to break through the “Noise” squelch is present. The default setting for the BCLO
is OFF, and here is how to change that setting:

Press the [
F
] key, then press the [
M/V
(
SET
)] key to enter the Set mode.
‚
Rotate the
DIAL
to select Menu Item #21 (“
BCLO
”).
ƒ
Press the [
F
] key to enable adjustment of this Menu item.
„
Rotate the
DIAL
to set the BCLO feature to the “ON” position.
Press the
PTT
key to save the new setting and resume normal operation.
Advanced Operation