manualshive.com logo in svg

Versitron SG71660M, Руководство пользователя

Поделиться
Скачать
Versitron SG71660M Скачать руководство пользователя страница 82

76 

4-2-15 SNMP 

Any Network Management System (NMS) running the Simple Network Management Protocol 

(SNMP) can manage the Managed devices equipped with SNMP agent, provided that the Management 
Information Base (MIB) is installed correctly on the managed devices. The SNMP is a protocol that is 
used to govern the transfer of information between SNMP manager and agent and traverses the Object 
Identity (OID) of the management Information Base (MIB), described in the form of SMI syntax. SNMP 
agent is running on the switch to response the request issued by SNMP manager.  

Basically, it is passive except issuing the trap information. The switch supports a switch to turn on 

or off the SNMP agent. If you set the field SNMP “Enable”, SNMP agent will be started up. All supported 
MIB OIDs, including RMON MIB, can be accessed via SNMP manager. If the field SNMP is set “Disable”, 
SNMP agent will be de-activated, the related Community Name, Trap Host IP Address, Trap and all MIB 
counters will be ignored.  

 
Function name: 

SNMP Configuration 

Function description: 

This function is used to configure SNMP settings, community name, trap host and public traps as 

well as the throttle of SNMP. A SNMP manager must pass the authentication by identifying both 
community names, then it can access the MIB information of the target device. So, both parties must 
have the same community name. Once completing the setting, click 

<Apply> 

button, the setting takes 

effect.  

Parameters description: 

SNMP enable: 

The term SNMP enable here is used for the activation or de-activation of SNMP. Default is 
Disable. 

Get/Set/Trap Community: 

Community name is used as a password for authenticating if the requesting network 
management unit belongs to the same community group. If they both don’t have the same 
community name, they don’t belong to the same group. Hence, the requesting network 
management unit cannot access the device with a different community name via SNMP 
protocol. If they both have the same community name, they can talk to each other. 

Community name is user-definable with a maximum length of 15 characters and is case 
sensitive. There is not allowed to put any blank in the community name string. Any printable 
character is allowable.  

The community name for each function works independently. Each function has its own 
community name. Say, the community name for Read only works for Read function and can’t 
be applied to other function such as Write and Trap. 

 

 

Default SNMP function: Disable 

Default community name for Get: public 

Default community name for Set: private 

Default community name for Trap: public 

  

Содержание SG71660M







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды