Versitron SG71660M Скачать руководство пользователя страница 3

Страница: 3 / 102

The information contained in this document is subject to change without prior notice.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the instruction manual may cause harmful

interference in which case the user will be required to correct the interference at his/her own expense.

NOTICE:

(1) The changes or modifications not expressively approved by the party responsible for compliance could void the

user's authority to operate the equipment.

(2) Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission

limits.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European Community and meets or exceeds the following technical

standard.
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information

Technology Equipment. This device complies with CISPR Class A.

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

CE NOTICE

Marking by the symbol

indicates compliance of this equipment to the EMC directive of the European

Community. Such marking is indicative that this equipment meets or exceeds the following technical standards:

EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information

Technology Equipment.

EN 50082/1:Generic Immunity Standard -Part 1: Domestic Commercial and Light Industry.

EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical equipment -

Part 2: Harmonics.

Содержание SG71660M







































































































Результаты поиска

Содержание SG71660M

Отзывы:

Бренды по названию

Популярные бренды

Versitron SG71660M, Руководство пользователя

Результаты поиска

Содержание SG71660M

Отзывы:

Бренды по названию

Популярные бренды