66
Disable
Don’t Care
Don’t Care
Port Uncontrolled
Enabled Auto
Successful Port
Authorized
Enabled Auto
Failure
Port
Unauthorized
Enabled
ForceUnauthorized
Don’t Care
Port Unauthorized
Enabled ForceAuthorized Don’t
Care Port
Authorized
Function name:
802.1X Configuration
Function description:
This function is used to configure the global parameters for RADIUS authentication in 802.1x port
security application.
Parameter description:
Mode:
Enable or disable 802.1X function.
RADIUS IP:
RADIUS server IP address for authentication.
Default: 0.0.0.0
RADIUS UDP Port:
The port number to communicate with RADIUS server for the authentication service. The valid
value ranges 1-65535.
Default port number is 1812.
RADIUS Secret:
The secret key between authentication server and authenticator. It is a string with the length
1 – 15 characters. The character string may contain upper case, lower case and 0-9. It is
character sensitive. It is not allowed for putting a blank between any two characters.
Default: None
Admin State:
This is used to set the operation mode of authorization. There are three type of operation
mode supported, Force Unauthorized, Force Authorized, Auto.
y
Force Unauthorized:
The controlled port is forced to hold in the unauthorized state.
y
Force Authorized:
The controlled port is forced to hold in the authorized state.
y
Auto:
The controlled port is set to be in authorized state or unauthorized state depends on the
result of the authentication exchange between the authentication server and the supplicant.
Default: Force Authorized
Port State:
Show the port status of authorization.
Re-authenticate:
Specify if subscriber has to periodically re-enter his or her username and password to stay
connected to the port.
Re-authenticate All:
Re-authenticate for all ports in at once.
Force Reinitialize:
