manualshive.com logo in svg

Versitron SG71660M, Руководство пользователя

Поделиться
Скачать
Versitron SG71660M Скачать руководство пользователя страница 71

65 

6. 

After receiving the Radius-Access-Request, the authentication server sends Radius-
Access-Challenge to the supplicant for asking for inputting user password via the 
authenticator PAE.  

7. 

The supplicant will convert the user password into the credential information, perhaps, in 
MD5 format and replies an EAP-Response with this credential information as well as the 
specified authentication algorithm (MD5 or OTP) to Authentication server via the 
authenticator PAE. As per the value of the type field in message PDU, the authentication 
server knows which algorithm should be applied to authenticate the credential information, 
EAP-MD5 (Message Digest 5) or EAP-OTP (One Time Password) or other else algorithm. 

8. 

If user ID and password is correct, the authentication server will send a Radius-Access-
Accept to the authenticator. If not correct, the authentication server will send a Radius-
Access-Reject. 

9. 

When the authenticator PAE receives a Radius-Access-Accept, it will send an EAP-
Success to the supplicant. At this time, the supplicant is authorized and the port 
connected to the supplicant under 802.1x control is in the authorized state. The 
supplicant and other devices connected to this port can access the network. If the 
authenticator receives a Radius-Access-Reject, it will send an EAP-Failure to the 
supplicant. This means the supplicant is failed to authenticate. The port is in the 
unauthorized state, the supplicant and the devices connected to this port won’t be 
allowed to access the network. 

10.  When the supplicant issue an EAP-Logoff message to Authentication server, the port you 

are using is set to be unauthorized. 

 

Fig. 4-15 

The 802.1X “Enabled” is the type of authentication supported in the switch. In this mode, for the 

devices connected to this port, once a supplicant is authorized, the devices connected to this port can 
access the network resource through this port. 

802.1x Port-based Network Access Control function supported by the switch is a little bit complex, 

for it just supports basic “Enabled” mode, which can distinguish the device’s MAC address and its VID. 
The following table is the summary of the combination of the authentication status and the port status 
versus the status of port mode, set in 802.1x Port mode, port control state, set in 802.1x port setting. Here 
Entry Authorized means MAC entry is authorized. 

Port Mode 

Port Control 

Authentication

Port Status 

Содержание SG71660M







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды