VersaLogic Blackbird VL-EPU4462, Справочник по аппаратуре

Страница: 41 / 74

Multi-purpose I/O
VL-EPU-4562/4462 Reference Manual 41
The EPU-4562/4462 uses a Texas Instruments ADS8668 eight-channel 12-bit A/D converter.
The converter has a 500 kilo-samples-per-second (ksps) aggregate sampling rate, with a 1.115 μs
acquisition time, high-impedance The converter is per-channel programmable for the following
input ranges:

±0.64 V

0 to 1.28 V

±1.28 V

0 to 2.56 V

±2.56 V

0 to 5.12 V

±5.12 V

0 to 10.24 V

±10.24 V
Communications with the A/D converter are handled by the FPGA, which uses the SPX slave
selection signal for SPI device 5 to enable the A/D read strobe for the SPI interface. Refer to the
VL-EPU-4562/4462 Programmer’s Reference Manual
(available on the EPU-4562/4462 Product
Support Web Page) for information on configuring the SPX registers for A/D access.
Refer to the
Texas Instruments ADS8668 A/D Converter Datasheet for programming
information.
This table provides the pinout of the Analog-to-Digital and Digital to Analog Input connector.
Table 10: Analog-to-Digital and Digital to Analog Input Connector Pinout
Pin Signal Pin Signal
1 Analog Input 1 2 Analog Input 2
3 Analog Ground 4 Analog Ground
5 Analog Input 3 6 Analog Input 4
7 Analog Ground 8 Analog Ground
9 Analog Input 5 10 Analog Input 6
11 Analog Ground 12 Analog Ground
13 Analog Input 7 14 Analog Input 8
15 Analog Ground 16 Analog Ground
17 Analog Output #1 18 Analog Output #2
19 Analog Output #3 20 Analog Output #4
Cabling
The VL-CBR-2004 paddleboard is bundled with an adapter cable for connecting the Blackbird to
the VL-CBR-2004 paddleboard. This is a 12-inch, Pico-Clasp 20-pin to 20-pin cable.
If your application requires a custom cable, the following information will be useful:
EPU-4562/4462 Board Connector Mating Connector
Molex 501571-2007 Molex 501189-2010