Versalift 24, Руководство по установке

Страница: 18 / 23

18 Versa Lift
Installation - Assembly
(All Models)
!
WARNING
12. CENTER THE LIFT HOUSING: IMPORTANT STEP!!
To operate correctly, the lift housing must be adjusted so
it is centered over the floor opening. If not centered, the
cables will not wind evenly onto the winch drum. Take
these steps to center the lift housing.
Step 1: Lower the lift platform until the top is even with
the top of the mounting rails. See Fig. 36.
Step 2: Look closely at the space between the outside
ends of the platform triangle brackets and the inside
walls of the mounting rails. Determine which space is
larger, left or right.
Step 3: Adjust the position of the lift housing by pushing
it firmly left or right as shown in Fig. 36. If the left space is
larger, then push the lift housing right. If the right space is
larger, push the housing left. Repeat these steps until the
left and right spaces are equal.
Note: Even though the housing legs are bolted tightly to
the housing, they will move slightly when forced and this
will allow the housing to shift laterally.
Congratulations! Your installation is complete!
12. CENTER THE LIFT HOUSING
STEP 1: LOWER THE PLATFORM
SO THE TOP IS EVEN WITH THE
TOP OF THE MOUNTING RAILS.
STEP 2: COMPARE THE LEFT
AND RIGHT SPACES BETWEEN
THE TRIANGLE BRACKETS AND
THE MOUNTING RAILS.
STEP 3: PUSH LIFT
TOP OF
HOUSING LEFT OR
MOUNTING
RIGHT. REPEAT 2 & 3
RAILS
UNTIL BOTH SPACES
ARE EQUAL.
LEFT
SPACE
RIGHT
SPACE
TRIANGLE
BRACKETS
TOP OF
PLATFORM
Fig. 36
!