Versalift 24, Руководство по установке

Страница: 16 / 23

16 Versa Lift
Installation - Assembly
(All Models)
Fig. 33a
9.1. REMOVE THE PACKING SCREW
Remove the packing screw (see Fig. 33a) to release the
upper limit switch lever. NOTE: The Lift will not run in
the up direction until this lever is free to operate the
up limit switch!
9.2. PLUG IN YOUR CONTROL DEVICE
There are three control options for the Versa Lift. General
information about each control is provided in Fig. 33b,
shown to the right.
(Detailed information and required
hardware is provided in the box your control came in).

The corded remote (keyed) plugs into Port #1.

The downstairs (keyed) wall switch plugs into
Port #1, while the upstairs wall switch (no key) plugs
into Port #2.

The wireless radio receiver plugs into Port #1.
(The receiver can be mounted on the back of the lift
head, or on either side of the lift head. See Fig. 33a.)
See Fig. 33a below for the location of control Ports #1&2.
Please note the orientation of the locking tab on the plug,
as the plug will only insert one way. The locking tab must
be depressed whenever you wish to remove the plug.
For more information about the control devices, safety,
and Lift operation, please refer to the Owners Manual.
RECEIVER
CAN MOUNT
ON EITHER SIDE
RECEIVER
CAN MOUNT
ON THE BACK
CONTROL PORT #2
CONTROL PORT #1
9.2. PLUG IN YOUR CONTROL
TO THE CORRECT PORT(S)
UPPER LIMIT
SWITCH LEVER
TO CONTROL PORT #2 –
TO CONTROL PORT #1 –
9.1. REMOVE
THE PACKING
SCREW TO
RELEASE UP
LIMIT LEVER
CORDED
REMOTE
UPSTAIRS
WALL SWITCH
UP-DOWN
SWITCH
DOWNSTAIRS
WALL SWITCH
UP-DOWN
SWITCH
KEY
SWITCH
KEY
TO
CONTROL
PORT #2
TO
CONTROL
PORT #1
UP-DOWN
SWITCH
KEY
SWITCH
KEY
15-FT. CORD
TO
CONTROL
PORT #1
WIRELESS
TRANSMITTER
(REMOTE)
ON
WIRELESS
RECEIVER
UP
DOWN
OFF
“STORAGE” SWITCH
I=ON, O=OFF
BACK
VIEW
TO
CONTROL
PORT #1
Fig. 33b