26
4.4 Access Control
To secure your wireless LAN, the wireless access control is actually based on the MAC
address management. Select
Wireless Settings
->
Access Control
to display the following
page:
Setting Explanation
MAC Address Filter:
Enable or disable MAC address filter by selecting
Close
,
Allow
,
or
Block
. Select
Close
to malfunction MAC address;
Block
to prevent the MAC
addresses in the list from accessing the wireless network;
Allow
to allow the MAC
address in the list to access the wireless network.
MAC Address Management:
Input the MAC address to implement the filter policy.
Click
Add
to finish this setting.
MAC List:
Shows the MAC addresses added. You can add or delete them.
Note: Ceiling AP supports no more than 32 MAC addresses.
