17
used channel (you can also change the channel according to your need. All the
ceiling APs must at the same channel in order to establish the connections).
4.1.2.3 WDS AP Repeater Mode
WDS AP Repeater
mode can repeat and amplify wireless signals to extend wireless
network coverage. In this mode, wireless clients are allowed to connect.
When two LAN’s transmission distance exceeds the wireless device’s maximum
transmission value, or there is much block among devices, you can use this mode to solve
these problems by adding MAC addresses. The topology shows below:
Select
WDS AP Repeater
in the drop-down list of WDS Mode and the page will show as
below.
