15
This page includes the AP and WDS parameter setting. AP parameter setting can change
SSID and enable/ disable wireless feature.
AP MAC:
Enter the interconnection equipment’s MAC address.
Channel:
Select the channel according to interconnection equipment’s; the ceiling AP
on the two ends must be at the same channel.
Open Scan:
When you click this button, the ceiling AP will scan and list all the available
wireless devices automatically. Select the device which need to bridge, it will add the
device’s MAC address automatically and select the corresponding channel.
4.1.2.2 P2MP Bridge Mode
WDS P2MP
bridge mode which connects scattered wired network together is more
complicated than WDS P2P bridge mode. WDS P2MP usually transmits wireless signals
from one access point, and other access points are in charge of receiving signals so as to
share network resource. Support up to 4 remote ceiling AP connections. In this mode,
wireless clients are not allowed to connect.
WDS P2MP bridge mode can connect multiple ceiling APs together without cabling. If the
Root AP
is configured as WDS P2MP bridge mode, other (less than 4) remote access points
