versa VX-AP1WPro Скачать руководство пользователя страница 81

Страница: 81 / 122

Other Settings & Features

Auto Config/Update

The Auto Config/Update screen provides two (2) features:

•

Auto Config

- The Access Point will configure itself by copying data from another

(compatible) Access Point.

•

Auto Update

- The Access Point will update it Firmware by downloading the Firmware

file from your FTP Server.

Figure 60: Auto Config/Update Screen

Data - Auto Config/Update Screen

Admin Connections

Perform Auto Configu-
ration on this AP next
restart

If checked, this AP will perform Auto Configuration the next
time it restarts.

•

The wired LAN (NOT the Wireless LAN) will be
searched for compatible APs.

•

If a compatible AP is found, its configuration is cop-
ied. If more than one compatible AP exists, the first
one found is used.

•

Some data cannot be copied:

The IP address is not copied, and will not
change.

The operating mode (Repeater, Bridge, etc)
is not copied, and will not change.

Note: This checkbox is automatically disabled, so the Auto-
configuration is only performed once.

Содержание VX-AP1WPro



























































































































Результаты поиска

Содержание VX-AP1WPro

Отзывы:

Похожие инструкции для VX-AP1WPro

Бренды по названию

Популярные бренды

versa VX-AP1WPro, Руководство пользователя

Результаты поиска

Содержание VX-AP1WPro

Отзывы:

Похожие инструкции для VX-AP1WPro

Бренды по названию

Популярные бренды