Verona VDFSGG365 Series, Руководство по установке

Страница: 22 / 28

22
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF
THE INJECTOR OF THE OVEN BURNER
• Lift and remove the lower panel inside the oven.
• Gently unlock, from the burner, the safety valve probe “ V ” and the ignition electrode
“ E ” (as indicated in fig. 2.15). Take care not to damage the probe and the ignition
electrode.
• Unscrew and remove the burner securing screws “ A ” (fig. 2.15).
• Withdraw the burner as shown in figure 2.16.
• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 2.16)
and replace it with a new one selected in accordance with the “Injectors table”.
• Then replace the burner and the other components repeating the above steps in
reverse order.
IMPORTANT: Pay special attention to replace correctly the safety valve probe
“V” and the ignition electrode “E” as per figure 2.15. Check the correct operation
of the safety valve and the ignition electrode.
Fig. 2.16
2
Anchorage
clip
E
E
V
V
Anchorage
clip
A
Fig. 2.15