Verona VDFSGG365 Series, Руководство по установке

Страница: 14 / 28

14
2
PRESSURE REGULATOR INSTALLATION
STEP 1
Mount the 1/2” NPT (conical) male connector to the pressure regulator and
tighten by using a wrench.
Do not over tighten the connector.
Over tightening may crack regulator.
STEP 2
Assemble the 1/2” NPT con pressure regulator group to the extension pipe interposing the gasket supplied.
The regulator cover must be oriented toward the front side of the range.
IMPORTANT: use two wrenches to tighten the connection.
Insert the extension pipe into the supplied support bracket “B” as shown:
• bend in the metal tab 90 degrees to allow the pipe to be fitted into the bracket (detail #1);
• bend the metal tab back into its original position to secure (detail #2).
Fig. 2.3
Fig. 2.2
Arrow
Regulator cover
Lock
90°
2
1
90°
Gasket Arrow
B