
12
30007230
VCS325SSBI/525SSBI Series Assembly
Figure 6
Cooking Grates
Finger Hole
Sear Plates
Warming Rack
Finger Hole
B362
Figure 7
Smoker Box
B396a
Sear Plate
‘Z’ End
Step 7: Install Internal Components
Parts Required:
VCS325SSBI
VCS525SSBI
(3) Sear Plates
(5) Sear Plates
(2) Cooking Grates
(4) Cooking Grates
(1) Warming Rack
(1) Warming Rack
(1) Smoker Box (Optional)
(1) Smoker Box (Optional)
Figures 6 & 7
Carefully place each of the sear plates side by side inside the grill by making sure the semicircular fi nger
groove is facing toward the back of the grill. Do the same with the cooking grates, making sure the fi nger
groove is facing toward the front of the grill. Set the warming rack into the supports located on either side of
the rear lid.
If using the smoker box, place the assembly on any sear plate by laying the bracket over the sear plate so
the ‘z’ ends of the bracket fi t into the ‘z’ slots of the sear plate. Slide the smoker box assembly back into the
locked position. (Fig. 7) Continue placing the remaining sear plates. The smoker box may be left in place
when not being used.
CAUTION:
Only add wood chips to the smoker box when grill is cool.