61D1013
10
BUF Vent-Free Fireboxes
1. Bend out the nailing flanges located on each side of the
firebox.
2. Slide the firebox into prepared framing or position firebox
in its final position and frame later.
3. Level the firebox by checking the top edge of the firebox.
Shim if necessary.
4. Anchor firebox to the side framing members using 8d
nails or other suitable fasteners.
Figure 9
5. The canopy must be installed for safe operation of the
heater.
FIREpLACE and CANOpY INSTALLATION
FP2902
nailing flanges
Nail Sides Through
Nailing Flanges
FP2902
Figure 9 -
Location of Nailing Flanges
CANOpY INSTALLATION
A canopy is furnished with each firebox and MUST be
installed for safe operation.
1. Locate three (3) holes at the top of the front frame.
Figure 10
2. Align the canopy with the holes in the top of the
frame.
3. Secure canopy to front of frame with screws provided.
Figure 10
FP2903
canopy install
Screws
Front Frame
Canopy
FP2903
Figure 10 -
Canopy Installation
W
ARNING
The firebox canopy must not be modified
or replaced with a canopy that may be
provided with the unvented decorative
room heater.
W
ARNING
Close fireplace screen panel before
operating a decorative type unvented room
heater.
