![Vermont Castings 085-3173-8 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/vermont-castings/085-3173-8/085-3173-8_assembly-and-operation-manual_1005898010.webp)
10
CONTACT US: 1-844-586-4660
MOUNTING WHEELS TO THE LEGS
PARTS REQUIRED:
2
x
Wheel (#23)
2
x
Wheel Axle Pin (#E)
2
x
Wheel Washer (#F)
2
x
Wheel Cotter Pin (#G)
INSTALLATION:
•
Attach the wheel to the leg by inserting the wheel axle pin through the wheel,
then the leg hole, wheel washer, and finally secure using wheel cotter pin. Note
illustration for order.
•
Repeat installation for the other wheel.
•
Once the wheel is secure, carefully lift the grill into an upright position.
INSTALLING THE SIDE SHELF
PARTS REQUIRED:
1
x
Side Shelf (#8)
INSTALLATION:
•
Remove the two lower pre-mounted screws from the side of the main barrel.
Install the side shelf onto the two upper pre-mounted screws from the side
of the main barrel. Insert screws through large holes on the side table. Press
down on the side table so that the screws are placed in the small hole position.
•
Then tighten completely when all four screws are mounted and aligned
properly.
MOUNTING THE FRONT SHELF BRACKETS
PARTS REQUIRED:
1
x
Left Front Shelf Bracket (#14)
1
x
Right Front Shelf Bracket (#15)
6
x
Screw (#A)
INSTALLATION:
•
Attach one front shelf bracket to the front of the grill barrel by using three
screws. Install each screw half-way, then tighten completely when all three
screws are mounted and aligned properly.
•
Repeat the same installation for the other front shelf bracket.
E
23
FG G F
E
23
14
15
8
6
7
8
GETTING S
TAR
TED