Vermeiren V300 XL, Инструкция по эксплуатации

Страница: 19 / 160

V300 XL
2013-11
Page 17
3.4 Adjusting the seat depth
The Vermeiren V300 XL is adjustable in 3 seat depths by changing the back rest connection
.
Seat depth Back rest connection
490 mm (Standard) Position 1
510 mm Position 2
530 mm Position 3
Table 3: Seat depth
The seat depth can be changed by the back
rest connection according the following
steps:
1.
Remove the bolts.
2. Move the back rest connection in the
desired position (see table 3).
3. Retighten the bolts.
4. Check the seat height and seat angle.
3.5 Adjust the brakes
L L L L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts so the brake
mechanism can slide over the guide .
4. Pull the brake mechanism over the guide to
the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
2
3
Position 1
Position 2
Position 3