V300 XL
2013-11
Page 19
Height armpad to seat
Number of the blocks
under the tube
Number of blocks between
tube and armpads
220 mm (Standard)
2
1
230 mm
1
2
240 mm
0
3
Table 4: Height of armpad
The depth of the armpad can be adjusted in 3 positions.
Depth of the armpad
Used holes
Front position
Back and middle
Middle position (Standard)
Hole 2 and 4
Back position
Front and middle
Table 5: Depth of armpad
Adjust the height and the depth of the armpad as follow:
1.
Remove both screws under the armpad.
2.
Place the correct number of blocks under and above the tubes, see table 4.
3.
Install the armpad with the required holes for depth adjustment.
3.8 Adjusting the stability and the maneuverability
The stability and maneuverability can be adjusted by moving the axle plate of the rear
wheels .
Adjust the stability and maneuverability according
following steps:
1. Loosen the bolts of axle plate.
2. Move the axle plate in the desired position.
3. Retighten the bolts.
4
Maintenance
For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.be.
Содержание V300 XL
Страница 158: ......