Inovys II
2011-11
Page 8
EN
NL
L
WARNING:
The brakes are adjustable and can wear – Check the operation of the
brakes before each use.
To apply the brakes:
1.
Push the brake handles
forward till you feel a
distinctive click.
L
CAUTION:
Risk of unintended movement –
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1.
Release one brake by pulling the handle
backwards.
2.
Hold the hand rim (if available) of the release
wheel with your hand.
3.
Release the second brake by pulling the handle
backwards.
2.7 Mounting or removing of arm supports
L
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
bottom side of the arm support.
The arm supports of the wheelchair can be mounted
by following instructions.
1.
Pull out the star knob
.
2.
Mount the arm support from above into the
provided bracket
.
3.
Let go of the star knob
.
4.
Turn the star knob
clockwise until it is finger-
tight.
5.
Check that the arm support is firmly secured.
The arm supports of the wheelchair can be removed
by following instructions.
1.
Turn the star knob
anti-clockwise.
2.
Pull out the star knob
.
3.
Remove the arm support out the bracket
.
4.
Let go of the star knob
.
The armrest of the wheelchair can be adjusted in 6
different heights (steps from 20 mm):
1.
Turn the star knob
anti-clockwise.
2.
Pull out the star knob
.
3.
Pull the armrest into the required position.
4.
Let go of the star knob
.
5.
Turn the star knob
clockwise until it is finger-
tight.
6.
Check that the armrest is firmly secured.