Inovys II
2011-11
Page 18
EN
NL
3. Loosen the bolts
so the brake
mechanism can slide over the guide
.
4. Pull the brake mechanism over the guide
to
the desired position.
5. Retighten the bolts
.
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
3.8 Adjusting of the footrests
3.8.1 Length of the footrests
L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrests as follow:
1. Remove the screw
(on the back of the
footrests).
2. Adjust the length of the footrest to a comfortable
length.
3. Tighten the screw
properly.
The max adjustable length
of the footrest shall be
marked with a triangle on
the tube.
Not possible when
footrest is in vertical
position.
3.8.2 Adjusting leg support
The leg supports are available in different sizes. Small size for seat width 400 mm
wheelchair and medium size for wheelchair with seat widths 450 mm and 500 mm.
Adjusting the height:
1. Fold away leg support (according paragraph
2.5).
2. Loosen bolt
on the side of the footrest.
3. Adjust the height of the leg support to a
comfortable position (step less).
4. Retighten the bolt
.