Vermeiren Inovys II-E, Инструкция по эксплуатации

Страница: 21 / 32

Inovys II-E
2017-02
Page 19
3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren multi-functional wheelchairs Inovys II-E has been designed entirely for your
comfort. This wheelchair can be adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.

Wrench set n° 10 to n° 22

Allen key set n° 3 to n° 8

Screwdriver Phillips head

Screwdriver

Nipper

Pliers
Assembly and settings may only be performed by a specialist dealer.
3.2 Manner of delivery
The Vermeiren Inovys II-E shall be delivered with:

1 frame with armrests, rear and front wheels

1 pair footrests

Seat and back cushions

Electronic parts (handset, control box, transformer, junction box, 2 motors, cables)

Tools

Manual

Accessories (optional)
When you receive the wheelchair, please check that the product supplied is complete and
fully functional. Warranty claims are only valid if the manufacturer (supplier) is notified in
writing within a period of two weeks. In the case of any defect that is not immediately
evident, warranty claims are only valid if the manufacturer (supplier) is notified in writing
within two weeks after it is detected. We shall remedy defects in the manner of our choosing
- either by carrying out a repair or by providing a replacement.