Inovys II-E
2017-02
Page 9
2.3 Mounting the rear wheels (only for quick release 22", 24" rear
wheels)
1. Take the rear wheel and push on button
.
2. Keep the button pushed in and mount the rear
wheels axle till it stops.
3. Release the button.
4. Check that the wheel is secured.
2.4 Mounting or removing of the footrests
L
WARNING:
Risk of injury - Make sure that the footrests are firmly locked before
using the footrests.
The wheelchair has two footrests that can be fold away to the "outside" with a 3 point
attachment system (
,
,
on the figure below). This system provides a steady, play-free
connection of the footrest to the seat frame.
The mounting of the footrests is done as
follows:
1. Hold the footrest sideways at the outside of
the wheelchairs frame and mount the pins
into the holes
.
2. Turn the footrest inwards till the pin click in
the hole of the attachment point
.
3. Turn the foot plates downwards.
To take off the footrests:
1. Fold the foot plates upwards.
2. Pull or push on lever
.
3. Turn the footrest to the outside of the
wheelchair until the hole comes loose of the
pin from attachment point
.
4. Pull the footrest upwards until the pins
come out the holes
.
2.5 Angle of footrests
L
CAUTION:
Risk of injury – Check that the levers
are well fixated after
adjusting the angle of the footrest.
L
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
adjusting mechanism. To adjust the angle of the footrest, only touch them at the
level of the foot plates-to avoid injury on your fingers.
L
CAUTION:
Risk of injury – Make sure that no objects and/or persons are inside
the swinging range of the adjust functions.
Содержание Inovys II-E
Страница 1: ...VERMEIREN Inovys II E I N S T R U C T I O N M A N U A L...
Страница 31: ......
