Gemini 2
2021-06
Using your wheelchair
10
EN
NL
3.2.7 Side supports (optional)
Head pelots
Adjusting width:
1. Loosen the two knurled knobs (12) on the rear
side of the backrest.
2. Move the head pelot (13) inwards or outwards
until the desired position (stepless, range 25
mm each side).
3. Retighten the two knurled knobs (12).
4. Check that the pelot (13) is well fixated.
5. Repeat these instructions for the other pelot
(13).
Adjusting height:
1. Loosen the two knurled knobs (12) on the rear
side of the backrest.
2. Move the head pelot (13) up or down until the
desired height (stepless, range 30 mm).
3. Retighten the two knurled knobs (12).
4. Check that the pelot (13) is well fixated.
5. Repeat these instructions for the other pelot
(13).
Adjusting height:
1. Loosen the two knurled knobs (14) on the side
of the pelot.
2. Move the head pelot (15) up or down until the
desired height (stepless, range 25 mm).
3. Retighten the knurled knobs (14).
4. Check that the pelot (15) is well fixated.
5. Repeat these instructions for the other pelot.
Adjusting depth:
1. Loosen the two knurled knobs (14) on the side
of the pelot.
2. Move the head pelot (15) to the front or back
until the desired depth (stepless, range 22,5
mm).
3. Retighten the two knurled knobs (14).
4. Check that the pelot (15) is well fixated.
5. Repeat these instructions for the other pelot.
12
13
14
15