Gemini 2
2021-06
Before use
6
EN
NL
To unfold the wheelchair:
1. Grasp the push bar (3) and move it upwards to unfold the frame.
2. Turn the frame so the front and rear wheels can rest on the ground.
3. Move the push bar backwards to unfold the frame completely.
4. Check that parts (2) click over the lower frame tube and the frame is firmly secured.
5. Turn the push bar in the desired position, see §3.2.9.
6. Take the seat and unfold the backrest if necessary.
7. Install the rear of the seat first*: the two metal hooks must be placed over the lower frame
rod that is furthest away from the front of the seat.
8. When the rear of the seat has been placed correctly, the front can be easily locked by
pushing down. A click will be heard.
9. Make sure that the seat has been attached properly to the lower frame.
10. Adjust the seat for the comfort of your child and install any accessories that had been
removed for transport (see §3.2).
*The seat of Gemini 2 can be installed with your child facing forwards or facing towards you as
you push. The same instructions apply for both options.
It is also possible not to remove the seat and fold the Gemini 2. Be aware that you should first
remove all the accessories and supports before completely folding the backrest to the front.
2.6 Storage
Make sure that your wheelchair is stored in a dry environment to prevent mould from
growing and the upholstery from being damaged, see also chapter 5.
