Express VB
2014-03
Page 11
2.5 Mounting or removing backrest
L
WARNING:
Risk of injury – Make sure that both securing levers
are engaged.
L
CAUTION:
Chance of pinching – Do not place fingers between the backrest tubes
of the wheelchair.
For transport the backrest of the wheelchair can be completely removed and put on the seat.
To mount the backrest on the electric wheelchair:
1. Check that the levers
are not fixated otherwise
loosen the levers
.
2. Mount the backrest tubes
Ⓐ
in the hexagonal
tubes of the frame
Ⓑ
.
3. Retighten the levers
properly.
To remove the backrest from the electric
wheelchair:
1. Turn on the levers
until they come loose.
2. Remove the backrest tubes
Ⓐ
out the hexagonal
tubes of the frame
Ⓑ
.
3. Put the backrest on the seat for transportation.
2.6 Mounting or removing battery housing
L
CAUTION:
Chance of pinching – Do not place fingers between the battery
housings and guide rails of the wheelchair.
To mount the battery housings on the electric wheelchair:
1. Grasp the handgrip
of the first battery housing (without thermal fuse)
.
2. Lift the battery housing
on the side rails
of your wheelchair.
3. Push the battery housing
as much as possible under the seat of the wheelchair.
4. Check that the connectors (battery, power module) fits in each other.
5. Grasp the handgrip
of the battery housing (with thermal fuse)
.
6. Lift the battery housing
on the side rails
of your wheelchair.
7. Push the battery housing
backwards.
8. Check that the battery connectors
fits in each other.
9. Turn the plate
downwards.
10. Retighten the star knob
.
