, 30°
2011-06
3.2 Modalità di consegna
La carrozzina Vermeiren Jazz può essere distribuita con:
•
1 telaio con poggiabraccia, ruote anteriori e posteriori (altezza del sedile 500 mm,
angolazione del sedile 7°) (dotazione aggiuntiva su 30°: sistema di
regolazione dell'inclinazione dello schienale a 30°)
•
1 coppia di poggiapiedi
•
Attrezzi
•
Manuale
•
Accessori
3.3 Regolazione dell'altezza e dell'angolazione del sedile
AVVERTENZA:
rischio di lesioni - Assicurarsi che tutte le viti siano serrate
saldamente con lo strumento appropriato.
AVVERTENZA:
rischio di ribaltamento - Regolando le ruote motrici, viene variato
l'interasse tra le ruote.
L'altezza e l'inclinazione del sedile del modello Vermeiren sono regolabili in 4 diverse
posizioni modificando la posizione delle ruote. L'altezza e l'inclinazione del sedile del
modello Vermeiren 30° sono regolabili in 3 diverse posizioni (altezza 470 - 530 mm)
modificando la posizione delle ruote. Per ciascuna altezza è prevista una diversa
regolazione delle ruote anteriori e posteriori.
Nella tabella che segue sono riassunte le diverse altezze del sedile con un'angolazione di
seduta standard di 7°.
Altezza sedile
Ruota posteriore
Ruota anteriore
Ø
Fori
Ø
Adattatore
/ forcella
Fori
430 mm
22"
Foro 9 e 11
200 mm
Corto
Foro 2 e 3
470 mm
24"
Foro 8 e 10
140 mm
Standard
Foro 2 e 3
500 mm
(Standard)
24"
Foro 6 e 8
200 mm
Standard
Foro 2 e 3
530 mm
24"
Foro 4 e 6
200 mm
Standard
Foro 1 e 2
Tabella 3: Altezze del sedile
Modificare l'altezza e l'angolazione del sedile attenendosi ai passaggi indicati di seguito e
facendo riferimento all'illustrazione riportata più avanti:
* Ruota anteriore:
1.
Allentare le viti
!
dell'adattatore della ruota direttrice
.
2.
Scegliere l'adattatore
e la forcella con dimensioni appropriate.
3.
Collocare l'adattatore della ruota direttrice nella posizione desiderata.
4.
Serrare le viti
!
in modo adeguato.
5.
Se necessario, modificare il diametro della ruota direttrice
(solo per l'altezza sedile di
470 mm).
* Ruota posteriore:
6.
Rimuovere le ruote posteriori (vedere § 1).
7.
Allentare le viti di fissaggio
!
sul blocco asse posteriore
.
8.
Spingere il blocco asse
verso l'alto o verso il basso fino a raggiungere l'altezza
desiderata.
9.
Serrare le viti
!
in modo adeguato.
10.
Montare le ruote posteriori.
11.
Regolare i freni in base a quanto riportato nella sezione § 3.8.