Verlinde TVI Series, Инструкция по эксплуатации

Страница: 10 / 30


10/30
03/2016
6
– Installation and start-up
6.1
– Fixings
The TVI Series winches must necessarily be installed on a flat, solid and safe surface that can withstand the
loads to which it will be subjected. An unsuitable installation location can result in serious accidents.
To assess the suitability of an installation location and its load resistance, it is advisable to take into account any
possible overloads, the weight of the actual winch as well as the weight of the optional components and/or
accessories installed on it, including any dynamic forces. The winch operator is responsible for selecting the
installation location. In the event of any doubts regarding the suitability of an installation location, consult a civil
engineer or a stress and strain specialist.
Correctly tighten the fixing bolts (see tables 4.2 and 4.3)
Screw/Nut
Tightening torque screw / Nut quality 8.8
Nm
M10 51
M12 85
M14 140
M16 210
M20 410
M24 710
6.2 - Mains power supply
Very important: the winch will only operate with full power when the motor is correctly supplied with a suitable
cable cross-section.
Provide voltage protection before the electric box.
An isolator must be installed at least 10 meters from the usage location.
6.3 - Adjusting the limit switch (optional)
The TVI Series winches are available with two types of limit switches:
Clock type: Remove the protective cover of the device (inside this cover you will find the diagram below). The
levers, which are now accessible, can be turned manually.

Adjustment of the winding stop point:

Wind the rope to the maximum desired winding point. Stop the winch.

Still in this position, manually move the red lever (2) to the lowest position of the rotation circle, where it
activates the switch (3)

Adjustment of the unwinding stop point:

Unwind the rope to the maximum desired unwinding point. Stop the winch.

Still in this position, manually move the black lever (1) to the lowest position of the rotation circle, where it
activates the switch (3)