Verlinde TVI Series, Инструкция по эксплуатации

Страница: 12 / 30


12/30
03/2016
Still in this position, with the help of a suitable screwdriver, turn the adjustment screw (2) until a click is heard in
the contactor.
This range of limit switches also includes a model with 4 positions.
If you need more positions, do not hesitate to consult us.
6.4 - Working rope
Warning: the direction of rotation of the drum depends on the connection of the machine.
Reminder: check the maximum capacity of the winch (see Models available § 4.4).
Very important:
Safety regulations require 2 to 3 coils of rope to be left on the drum at all times.
To comply with the legislation, the rope should not exceed the recommended diameter.
Make sure the rope and hook used guarantee a safety level corresponding to the table in §4.4 if they were not
supplied by the manufacturer with the machine.
The useful life of the steel ropes used on the winch depends on many factors, including the conditions of the
work cycles (lifting height, lifting speed, number and type of deviations, etc.) as well as the operating mode
(number of winding layers, working cycle distribution along the length of the steel rope, etc.). The potential
useful life of the steel ropes is therefore subject to considerable variations according to these points.
It is important to remember that any replacement ropes must use materials with the same characteristics as the
original rope.
This replacement must be included in the maintenance log.
Measuring the rope diameter:
Correct measurement Incorrect measurement
with slide caliper
Handling of steel ropes:

Always use suitable protective gloves when handling steel ropes

Never use any ropes that have defects such as:

An unacceptable number of broken strands

Birdcaging

Birdcaging

Flattening

Shrinkage

Strand extrusion

Broken cable cores

Slack strands

Bends or kinks

Always check the rope for wear before using it.

Never use steel ropes as loops

Never expose the steel ropes to jagged lips or sharp edges