Verizon HomeFusion Broadband, Руководство пользователя

Страница: 68 / 148

6 GUI: Firewall Settings
DMS-CTC-20110909-0007 v2.0 63
4 The Port Triggering page appears:
Click:

Add to create a new port triggering rule.

to delete a port triggering rule.
Adding a port triggering rule
On the Port Triggering page:
1 On the bottom of the table, click the Add list at the bottom of the page.
2 In the Add list, select either of the following:

One of the pre-defined service.

User Defined to create a new services definition if your service is not listed
and specify the following information:
 Service Name
The name that you want to use to refer to this service.
 Outgoing Trigger Ports
Enter the port number(s) that the local host will be using to contact the
remote host. When the HBR detects outbound traffic on this port, the HBR
will open the ports specified in your rule.
 Incoming Ports to open
These ports will be opened when the rule is triggered. Incoming traffic
arriving at this port will we forwarded to the host that triggered the rule.
3 The port triggering rule is now created.