Verizon HomeFusion Broadband, Руководство пользователя

Страница: 28 / 148

2 Setup
DMS-CTC-20110909-0007 v2.0 23
2.3.3 Wired Connection to the HBR
Requirements
 Both your network device (for example, a computer, an Ethernet switch and so
on) and HBR must have a free Ethernet port.
 Your network device must be configured to obtain an IP address automatically.
This is the default setting. For more information, see
“10.4 Configuring Dynamic IP
Addressing on Windows” on page 143 .
Procedure
Proceed as follows:
1 Take the yellow Ethernet cable that was included in your box.
2 Plug the Ethernet cable into one of the four yellow Ethernet ports on the back of
the HBR.
3 Plug the other end of the yellow Ethernet cable into an Ethernet port on the
computer.
4 If you have not yet started up your computer, start up your computer.
5 The LED on the connected Ethernet port should be solid green or blinking green.
6 Use the same procedure to connect your other Ethernet devices (computers,
network printers and so on).
Computer
HBR
Yellow Ethernet Cable