NeuroTrac
®
Sports Operation Manual
9
First press the ESC button to return to the home screen
1.
Press the SET button and the Hz symbol will flash on/off, then press
the + or – button to adjust the Pulse Rate.
2.
Press the SET button again and the µS symbol will flash on/off, then
press the + or – button to adjust the Pulse Duration from 50 to 450 µS
3.
Press the SET button again and the Clock [Time] symbol will flash on/
off, then press the+ or – button to adjust the time Channel A +/- button
to alter the hours and Channel B +/- button to adjust minutes.
[Maximum time 1 hour 30 minutes].
4.
Press the SET button again and the WRK [Work] symbol will flash on/
off, then press the + or – button to adjust the work period from 2 –99
seconds.
5.
Press the SET button again and the RST [Rest] symbol will flash on/
off, then press the + or – button to adjust the rest period 2 – 99 seconds.
6.
Press the SET button again and the RMP [Ramp up] symbol will flash
on/off, then press the + or - button to adjust the ramp up period from
0.1 - 9.9 seconds.
7.
Press the SET button again and ALT [Alternating] or SYN
[Synchronous] symbol will flash on/off, then press the + or – button to
select ALT or SYN.
8. If SYN [Synchronous] has been selected, press the SET button again to
set the required delay time of Ch. B stimulation after Ch. A one. DLY
will flash on the LCD display. Select the delay by pressing the
Ch. B +/- buttons to read the appropriate delay value
(between 0.1 sec. and 4 sec).
After setting up the programme, press the ESC button to install and store the
customised programme. Repeat the above procedure to re-programme.
Note:
You must press the ESC button before locking the unit.
Setting up the Customised
Programme PC1, PC2 or PC3