VERITAS Mk.II Honing, Руководство пользователя

Страница: 15 / 16

Angle Registration Jig
Registration Jig
Clamp Knob
Registration Stop
Registration
Stop
Clamp Jaws
Blade Clamp Knob
3
Once the blade carrier is installed, slide the angle registration jig onto the
dovetail feature along the front of the narrow-blade carrier. Locate the
registration stop for the desired bevel angle.
Figure 3: Connecting the registration jig onto the narrow-blade carrier.
Figure 4: Installing a chisel.
Hold the narrow-blade carrier assembly upside down. Turn the blade clamp knob
counterclockwise to open the clamp jaws, place the chisel blade between the
two jaws and against the registration stop, then turn the clamp knob clockwise
to clamp the chisel blade fi rmly (but avoid overtightening). (
Note:
The parallel
jaws in the narrow-blade carrier automatically center the blade.
)
Loosen the registration jig clamp knob, slide the registration jig off of the
narrow-blade carrier, and sharpen the blade.