6%2)3).$5342)%3
inStALLAtion guiDe
XPSD1
ZL0059-0B
PAGE 2
©2008 Veris Industries USA 800.354.8556 or 503.598.4564 / [email protected]
8251-0024C
05082
operation
troubleshooting
Problem
Solution
LED off
Fault. Check line voltage, breakers, and connections. If
OK, replace unit.
The XPSD1 surge protective device provides surge protection for electrical and
automation cabinets. It mounts onto 35 mm DIN rail near the incoming power source
to isolate the cabinet from the outside environment.
Note: this device must be installed with proper supplementary protection (MGSP or
equivalent; see specifications).
MGSP
L3
N
L2
L1
G
L1 L2 L3
N
Load Breakers
*
* max. 30A per NEC or as per local code
Wiring Diagram
NC
NO
Normally Closed
Common
Normally Open
3
3
2
1
2
1
remote monitoring option
The XPSD1 includes a three-pin socket and plug
to allow the customer to wire one set of normally
open (N.O.) and normally closed (N.C.) dry
contacts to a remote monitoring indicator. The
customer must provide power for the indicator
(0.3A @ 125VAC, 110VDC; 1.0A @ 30VDC). In the
event of an alarm, the N.O. contact closes, and
the N.C. contact opens.
Dimensions
2.6”
(65 mm)
3.4”
(86 mm)
3.7”
(92 mm)
1.8”
(45 mm)
3.5”
(89 mm)
Three phase, 4-wire 208Y/120VAC
Diagnostics
ON = OK
OFF = Fault