web server port on the router automatically.
Note
To enable this function, verify that the router supports UPnP and it is
activated.
6. In the
Friendly name
box, type the name for the IP Camera for identity.
7. Click
Save
.
Configuring Mail
The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP)
when an alarm is triggered. SMTP is a protocol for sending e-mail messages
between servers. SMTP is a relatively simple, text-based protocol, where one
or more recipients of a message are specified and the message text is
transferred.
► To configure mail
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Mail
.
4. In the
1st SMTP (mail) server
box, type the name of the mail server.
5. In the
1st SMTP (mail) server port
box, type the port number of the mail
server. The default value is 25.
6. In the
1st SMTP account name
box, type the user account name.
7. In the
1st SMTP password
box, type the password.
8. In the
1st recipient email address
box, type the email address of the
recipient.
9. Select
1st SMTP SSL
to use SSL.
10. In the
2nd SMTP (mail) server
box, type the name of the mail server.
11. In the
2nd SMTP (mail) server port
box, type the port number of the
mail server. The default value is 25.
12. In the
2nd SMTP account name
box, type the user account name.
13. In the
2nd SMTP password
box, type the password.
14. In the
2nd recipient email address
box, type the email address of the
recipient.
15. Select
2nd SMTP SSL
to use SSL.
16. Click
Save
.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
42
