Verine VLF45NG, Инструкции по установке, использованию и обслуживанию, Страница: 8 / 20

8
FIGURE 5
7 IR Signal Receiver
The signal receiver should be placed on the hearth just behind the ash pan cover
such that it is visible to the user operating the remote control handset.
If the
receiver is covered in any way the fire will not operate. The receiver is secured
to a bracket with a screw which can be removed when the burner is taken out for
service. The bracket should be fixed to the hearth with the double sided tape
provided
after having selected a suitable position for it with the fret and ash pan
cover in position (See Figure 5). The signal receiver must be positioned on the
bracket with the raised part facing the user.
8 Fitting the Battery to the Handset
Before using the
appliance
remove
the access cover in
the rear of the
handset and insert
a 9-volt PP3 size
battery. Connect
the
battery by
pushing the
connector on to the
terminals. Make
sure the battery is
connected correctly.
Replace the access cover.
ASSEMBLING THE FIRE AND PLACING THE LOGS
WARNING
This product uses fuel effect pieces containing Refractory Ceramic Fibre
(RCF), which are man-made vitreous silicate fibres along with fibrous glass
and mineral wool. Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; consequently, it makes sense to
take care when handling these articles to ensure that the release of dust is
kept to a minimum.
FIGURE 6