Verilink DIDCSU 2912, Руководство пользователя

Страница: 64 / 107

DIDCSU T1 Version
3-24 Verilink DIDCSU 2912 User Manual
Figure 3-16 24 hr T1 Performance Data Summary
Following is a brief description of the
24 hr T1 Performance Data
Summary
fields. When one of these options is selected, the
previous 24-hour data displays in 15-minute increments for a total
of 96 blocks of time.
Table 3-12 24 hr T1 Performance Data Summary
-- DIDCSU 2912 PERFORMANCE/STATUS MENU -- -- DIDCSU 2912 PERFORMANCE/STATUS MENU -- -- DIDCSU 2912 PERFORMANCE/STATUS MENU -- -- DIDCSU 2912 PERFORMANCE/STATUS MENU --
24hr T1 Performance Data Summary 24hr T1 Performance Data Summary 24hr T1 Performance Data Summary 24hr T1 Performance Data Summary
ES BES SES UAS LOF LOSS AISS ES BES SES UAS LOF LOSS AISS ES BES SES UAS LOF LOSS AISS ES BES SES UAS LOF LOSS AISS
PORT 1 0 0 0 0 0 0 0
PORT 1 0 0 0 0 0 0 0 PORT 1 0 0 0 0 0 0 0
PORT 1 0 0 0 0 0 0 0
PORT 2 0 0 0 0 0 0 0
PORT 2 0 0 0 0 0 0 0 PORT 2 0 0 0 0 0 0 0 PORT 2 0 0 0 0 0 0 0
En) Errored Seconds Un) Unavailable Seconds En) Errored Seconds Un) Unavailable Seconds En) Errored Seconds Un) Unavailable Seconds En) Errored Seconds Un) Unavailable Seconds
Bn) Bursty Seconds Sn) Severely Errored Seconds
Bn) Bursty Seconds Sn) Severely Errored Seconds Bn) Bursty Seconds Sn) Severely Errored Seconds
Bn) Bursty Seconds Sn) Severely Errored Seconds
Ln) LOS Seconds Fn) SEF Seconds
Ln) LOS Seconds Fn) SEF Seconds Ln) LOS Seconds Fn) SEF Seconds Ln) LOS Seconds Fn) SEF Seconds
Dn) LOF Seconds On) OOF Seconds
Dn) LOF Seconds On) OOF Seconds Dn) LOF Seconds On) OOF Seconds
Dn) LOF Seconds On) OOF Seconds
An) AIS Seconds
An) AIS Seconds An) AIS Seconds An) AIS Seconds
Mn) Loss of Frame Counts Zn) AIS/SEF Seconds
Mn) Loss of Frame Counts Zn) AIS/SEF Seconds Mn) Loss of Frame Counts Zn) AIS/SEF Seconds
Mn) Loss of Frame Counts Zn) AIS/SEF Seconds
Qn) Errored Seconds Type A Hn) Frame Errors
Qn) Errored Seconds Type A Hn) Frame Errors Qn) Errored Seconds Type A Hn) Frame Errors Qn) Errored Seconds Type A Hn) Frame Errors
Jn) Degraded Minutes In) Error Free Seconds
Jn) Degraded Minutes In) Error Free Seconds Jn) Degraded Minutes In) Error Free Seconds
Jn) Degraded Minutes In) Error Free Seconds
Rn) Reset Registers X) exit this screen
Rn) Reset Registers X) exit this screen Rn) Reset Registers X) exit this screen Rn) Reset Registers X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
Command Description
En Errored Seconds (ES): A second with one or more AIS, LOS, or LOF defects.
Un Unavailable Seconds (UAS): Counted for every second in which an Unavailable Signal State
occurs with the onset of 10 contiguous SES errors. It is also defined as the number of
seconds a service is unavailable due to a Loss-of-Frame (LOF) condition. The UAS condition
is stopped when the failure condition clears.
Bn Bursty Seconds (BES): A second having between 2 and 319 CRC-6 (Cyclic Redundancy
Check) error events.
Sn Severely Errored Seconds (SES): This error counts one second intervals with an AIS or CRC
error.
Ln Loss-of-Signal (LOS) Seconds: A second during which the DIDCSU is in a Loss-of-Signal
state. LOS is declared upon detecting 175 consecutive zeros, it is cleared with the receipt
of the next 1 bit.
Fn Severely Errored Framing (SEF) Seconds: Those seconds in which two or more framing bit
errors occur within a 3-millisecond period. In ESF mode, this interval may or may not
coincide with an ESF multiframe.
Dn Loss-of-Frame (LOF) Seconds: An LOF alarm is declared when a 3-second interval of
continuous Out-Of-Frame (OOF) or Loss-of-Signal (LOS) state is detected. If at least 10
seconds elapse without an LOS or LOF error, the LOF alarm is cleared.
On Out-of-Frame (OOF) Seconds: A condition when any three of four consecutive frame bits
received from the T1 line are incorrect.