Verilink DIDCSU 2912 Скачать руководство пользователя страница 4

Страница: 4 / 107

Verilink DIDCSU 2912 User Manual

•

Do not place this product on an unstable cart, stand, or table. It may fall, causing

serious damage to the product.

•

Slots and openings in the shelves are provided for ventilation to protect them

from overheating. These openings must not be blocked or covered. Never place

this product near a radiator or heat register.

•

This product should be operated only from the type of power source indicated on

the marking label and manual. If you are unsure of the type of power supply you

are using, consult your dealer or local power company.

•

Do not allow anything to rest on the power cord. Do not locate this product where

the cord will interfere with the free movement of people.

•

Do not overload wall outlets and extension cords, as this can result in fire or

electric shock.

•

Never push objects of any kind into the shelves. They may touch dangerous

voltage points or short out parts that could result in fire or electric shock. Never

spill liquid of any kind on this equipment.

•

Unplug the equipment from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product has been dropped or if the cabinet has been damaged.

Product Warranty

Verilink’s product warranty covers repair or replacement of all equipment under

normal use for a five-year period from date of shipment. Our in-house Repair Center

services returns within ten working days.

Customer Service

Verilink offers the following services:

•

System Engineers at regional sales offices for network design and planning

assistance (800) 837-4546)

•

Technical Assistance Center for free 24x7 telephone support during installation,

maintenance, and troubleshooting (800) 285-2755, [email protected]

•

Return Materials Authorization (RMA) (800) 926-0085 x2282

•

Maintenance contracts and leasing plans (800) 837-4546

•

Technical Training on network concepts and Verilink products (800) 282-2755,

[email protected]

•

Web site (www.verilink.com)

Publications Staff

This manual was written and illustrated by Steve Rider. Contributing writers

include: Marie Metivier, Theresa Lau, and Barbara Termaat.

Содержание DIDCSU 2912












































































































Результаты поиска

Содержание DIDCSU 2912

Отзывы:

Бренды по названию

Популярные бренды

Verilink DIDCSU 2912, Руководство пользователя

Результаты поиска

Содержание DIDCSU 2912

Отзывы:

Бренды по названию

Популярные бренды