background image

Federal Communication Commission Interference Statement 

 

This  device complies with  Part 15 of the  FCC Rules. Operation is  subject  to 

the  following  two  conditions:  (1)  This  device  may  not  cause  harmful 

interference,  and  (2)  this  device  must  accept  any  interference  received, 

including interference that may cause undesired operation. 

 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a 

Class  B  digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.    These  limits 

are designed to provide reasonable protection against harmful interference in a 

residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio 

frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the 

instructions,  may  cause  harmful  interference  to  radio  communications.   

However, there is no guarantee that interference will not occur in a particular 

installation.    If  this  equipment  does  cause  harmful  interference  to  radio  or 

television  reception,  which  can  be  determined  by  turning  the  equipment  off 

and on, the user is encouraged to try to correct the interference by one of the 

following measures: 

 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

FCC  Caution:

  Any  changes  or  modifications  not  expressly  approved  by  the 

party responsible for compliance could void the user's authority to operate this 

equipment. 

 

This  transmitter  must  not  be  co-located  or  operating  in  conjunction  with  any 

other antenna or transmitter. 

Содержание Presto Smart e355





































Отзывы: