VeriFone Carbon 8, Руководство по установке

Страница: 22 / 48

S
ETUP
Installing or Replacing MSAM Cards
22
C
ARBON
8 I
NSTALLATION
G
UIDE
R
EV
IS
IO
N
A
.1
9
Align printer module with the base of the Carbon 8 base and slide them
together (see Figure 10 ).
Installing or
Replacing MSAM
Cards
When you first receive your Carbon 8, you may need to install one or more MSAM
cards, or you may need to replace old cards.
To install or replace
MSAMs
1
Power down the Carbon 8 unit.
2
Place the unit upside down on a soft, clean surface to protect the display from
scratches.
3
Hook your finger on the latch and lift the cover to access the MSAM card slot
(see Figure 11 ).
Figure 11 Opening the MSAM Cover
4
Remove any previously installed MSAM cards from the cardholder.
NOTE
For paper ordering information, refer to Accessories and Documentation .
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends
using a grounded anti-static wrist strap.
NOTE
Verifone ships variants of the Carbon 8 device for different markets. Your unit
may have different features described in this section.