ENGLISH • 29
ELECTROMAGNETIC COMPATIBILITY
Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture’s declaration - electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below. The customer of the user of the device
should assure that it is used in such an environment.
1) This product needs special precautions regarding electromagnetic compatibility (EMC) and needs to be installed and
put into service according to the EMC information provided, and this unit can be affected by portable and mobile radio
frequency (RF) communications equipment.
2) Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect
operation of the unit.
3) Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
4) Caution: This machine should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use
is necessary, this machine should be observed to verify normal operation in the configuration in which it will be used.
Emmission Test
Compliance
Electromagnetic Environment Guidance
Group 1
Class B
Class A
Complies
This device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
This device is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic purposes.
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Содержание TENS 22-040
Страница 36: ......
