ENGLISH • 25
TROUBLESHOOTING
Display does not illuminate/
is weak / Control unit will not
turn on.
Intensity output is low / no
stimulation is occurring.
Electrode pads are not adher-
ing to the skin.
Recharge the battery.
Electrode pad may be dirty; clean and
attempt again.
Confirm that the electrode wires are firmly
connected to the control unit.
Battery power is low, recharge the battery.
Device may not be applied properly; ensure
BOTH pads from the same wire are adhered
to the body.
Review the ‘Caring for Electrode Pads’
section of this manual; pads may need to
be replaced.
Problem Solution
Содержание TENS 22-040
Страница 36: ......