Vantage 3000 P
Version 3.4v-01/2019
8 | Page
Table 5 Replacing Pump Head – EZ Head
Table 6 Stacking – EZ Head
7.2.3 Replacing the Pump Head
– EZ Head
1.
Offer pump head to backplate at angle
locating drive shaft and rotor shaft with
pump head at approx 45° to vertical,
locating backplate lugs in housing.
2.
Push and twist until location lever clicks
into position.
3.
Remove by depressing location lever and
twisting pump head counter clockwise 45°.
7.2.4 Stacking Pump Head
– EZ Head
A pump head can be stacked over a similar
stackable head as demonstrated in table 6.
1. Attach the stackable head on to
the backplate (refer 7.2.3 )
2. Offer the pump head over the stackable
head locating the drive shaft and pump
shaft with pump head at approx 45°
to vertical, locating lugs in the housing.
3. Push and twist unit location lever
clicks into position.
4. Remove by depressing location lever
on the stackable head and twisting
pump head counter clockwise 45°.
Location lugs
Location lugs
Location lever
1
2
3
4
1
2
3
4
