iDura 05-35
Version 1.0v-11/2020
© Verder International B.V
6 | Page
Warranty
The warranty is void if the customer fails to follow any
Instruction, Warning or Caution in this document. Verder
has made every effort to illustrate and describe the prod
-
uct in this document. Such illustrations and descriptions
are however, for the sole purpose of identification and
do
not
express or imply a warranty that the products are mer
-
chantable or fit for a particular purpose, or that the prod
-
ucts will necessarily conform to the illustration or descrip-
tions.
Obtain the manufacturer’s approval prior to carrying out
any modifications, repairs or alterations during the war
-
ranty period. Only use genuine parts or parts that have
been approved by the manufacturer.
For further details regarding warranty, refer to terms and
conditions.
2.2.3 Obligation of Personnel
It is imperative that the instructions contained in this
manual are complied with by the operating personnel
at all times.
u
Pump and associated components:
–
Do not lean or step on them or use as climbing aid
–
Do not use them to support boards, ramps or beams
–
Do not
use them as a fixing point for winches or sup
-
ports
–
Do not de-ice using gas burners or similar tools
u
Do not remove the safety guarding for hot, cold or moving
parts during operation.
u
Reinstall the safety equipment on the pump as required
by regulations after any repair / maintenance work on the
pump.
2.3 Specific Hazards
2.3.1 Hazardous Pumped Liquids
Follow the statutory safety regulations when handling haz
-
ardous pumped liquids (e.g. hot, flammable, poisonous or
potentially harmful).
Use appropriate Personal Protective Equipment when car
-
rying out any work on the pump.
2.3.2 Lubricants
Ensure that the lubricant and pumped liquid are compat-
ible with each other. This is a precautionary measure in
case of accidental hose burst whereby the pumped liquid
comes in contact with the lubricant. (
g
Refer datasheet
for lubricant to ensure compatibility and also refer to (
g
11
Technical Specifications) for specific lubricant limitations)
2.3.3 Sharp Edges
Pump parts, such as the shims and impellers, can be
sharp
–
Use protective gloves when carrying out any work on
the pump