iDura 05-35
Version 1.0v-11/2020
© Verder International B.V
12 | Page
Parameter Description
User can change?
1
Maximum speed/frequency limit
No
2
Minimum speed/frequency limit
No
3
Acceleration ramp time
Yes
4
Deceleration ramp time
Yes
5
Stopping mode/mains loss response
Yes
6
Energy optimiser
No
7
Motor rated voltage DELTA/STAR
No
8
Motor rated current DELTA/STAR
No
9
Motor rated frequency
No
10
Motor rated speed
No
11
Low frequency torque boost
No
12
Primary command source
Yes
13
Operating mode select
No
14
Extended/Advanced menu access code
Yes
15
Digital input function select
Yes
16
Analog input 1 signal format
Yes
17
Maximum effective switching frequency
No
18
Output relay function select
Yes
19
Relay threshold level
Yes
20
Speed 1
Yes
21
Speed 2
Yes
22
Speed 3
Yes
23
Speed 4
Yes
24
2nd ramp time (fast stop)
Yes
25
Analogue output function select
Yes
26
Skip frequency hysteresis band
Yes
27
Skip frequency centre point
Yes
28
V/F characteristic adjustment voltage
No
29
V/F characteristic adjustment frequency
No
30
Start mode, automatic restart, fire mode operation
Yes
31
Keypad start mode select
No
32
DC injection mode and duration
No
33
Spin start
Yes
34
Brake chopper enable (not size 1)
No
35
Analog input 1 scaling/slave speed scaling
Yes
8.2 iDura Inverter Functionality
Values set during assembly at Verder should not be changed. These have been determined to be specific to the
selected hardware. Some functionality in the inverter can be set by the customer to make it work with their system
and control method, though the following parameters should not be changed and will result in warranty being voided
if changed:
Table 4 iDura Inverter Parameters (continued)