Verdemax HTB20, Руководство по эксплуатации

Страница: 24 / 24

24
www.verdemax.it
Rama Motori SpA
Via Agnoletti, 8 - 42124 Reggio Emilia - Italy
Made in P.R.C.
Attention!
If you find out that safety functions, such as
the 2-switch mechanism or the safety stop,
are not functioning while working with the
hedge shears, immediately cease working
and take the machine to a specialised shop
for repairing.
1) Two-hand safety switch
(Fig. 5)
To switch the hedge shears on the bar switch in the
handle (1) and the grip switch of the bow-type handle
(3) must be pushed down. To switch the device off let
go of both switches. The motor already stops if one of
the two switches is released.
2) Quick blade stop
In order to avoid injuries through cuts, the blade will
stop in max. 1 sec. when one of the two switches is
released.
3) Blade safety rail (Fig. 8)
The cutting blade set back from the blade housing
reduc- es the risk of injuries due to unintentional body
contact. As soon as the hedge trimmer is switched
off, the sharp cutting blades will stop - due to safety
reasons - exactly under the cover rail in order to
reduce the risk of injuries during transport.
4) Impact protector
The extended guide rail prevents unpleasant shocks
(blade recoil) being transmitted to the operator due
to impact with solid objects (wall, ground etc.).
5) Gear protection feature
If solid objecst are caught in the cutting blade and
jam the motor, switch off the machine at once,
disconnect the power plug from the power socket,
remove the object and continue with the work.
The equipment is also fitted with an overload cutout
which protects the gears against mechanical damage
in the event of blade jams.
14. Storing the trimmer after use
The hedge shears must be stored such that there is
no danger of injuries being caused to persons by
the cutting blades!
Important note:
The shearing blades should be
cleaned after each use (see also Section Maintenance).
This will considerably increase the service life of the
device. Please use a lubricator that is not harmful to
the environment, e. g. our service spray. Then put the
shears in their case with the cutting blades first.
15. Spare parts
The following information should be provided when
ordering spare parts:
• Type of machine
• Item number of the machine
16. Repair Service
Repairs to electric power tools should only be carried
out by specialist electrical personnel.
Always keep the original packaging for a possibly
required shipping of the tool.
17. Information for environmental protection/
disposal
Dispose of the machine properly after it is worn out.
Disconnect the mains cable in order to prevent misuse.
Do not dispose of the machine with the household
waste. In the interest of environmental protection, take
it to a collection point for electric machines. Your
responsible local authority can provide you with
addresses and operating times. Also take the
packaging materials and worn out accessories to the
appropriate collection points.
Only for EU countries
Do not discard electric tools in the
household waste!
In accordance with European Directive 2012/19/EC
on waste electrical and electronic equipment and its
implementation in national law, waste electric tools
must be collected separately for environmentally-
compatible re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling mana-
gement and waste acts. This does not pertain to the acces-
sory parts and auxiliary equipment without electrical
components accompanying the waste equipment.