manualshive.com logo in svg

Verco DNA DD 1206, Инструкция по сборке, Страница: 4 / 4

Поделиться
Скачать
Verco DNA DD 1206 Скачать руководство пользователя страница 4

With the assistance of at least one other 

person turn the desk so that it stands 

on its legs. Your completed desk should 

resemble the image on the left.

Adjust the feet if needed by turning 

them individually to adjust their height. 

Each foot should be firmly placed on 

the floor ensuring that the desk does not 

wobble.

Place the black ‘mush head’ screws 

through the holes in each leg and 

screw them into the underside of the 

top using the 4mm Allen key. Continue 

turning until the fully inserted but avoid 

over-tightening.

This step is not essential. You can fix the 

spacer hook into position by sliding it 

to the desired position and screwing 

through the two holes in its base and 

into the underside of the desk top. 

There are no pilot holes for this as the 

hook can be placed anywhere along 

the length of the beam.

Содержание DNA DD 1206

Страница 1: ...ing upwards insert either end of the rail onto one of the metal lugs at the top of the leg If the rail will not slide on easily ensure that the bolts in the lug are fully retracted by turning them clockwise with the Allen key With the beam in place put the Allen key through one of the holes in the top of the beam and into the Allen bolt in the metal lug of the leg Turn this anti clockwise as if to...

Страница 2: ...ce Remember to turn the bolts anti clockwise to fix the beams in place Once complete check that all the beams are securely fastened to the legs Repeat this process with the remaining leg of the pair fixing it to the other end of the beam The result should resemble this illustration Repeat steps 1 3 with the remaining short beam and the other pair of legs You should now have two identical structure...

Страница 3: ...ckaging Take one of the rectangular blocks and one of the hooks With the Verco and 100 DNASH text on the inside of the moulding facing up insert the hook in to the central hole as shown left The hook will not immediately fit through the hole You need to brace the block with both hands and push on the end of the hook where the arrow shows very firmly using your thumb The hook will pass though the h...

Страница 4: ...s not wobble Place the black mush head screws through the holes in each leg and screw them into the underside of the top using the 4mm Allen key Continue turning until the fully inserted but avoid over tightening This step is not essential You can fix the spacer hook into position by sliding it to the desired position and screwing through the two holes in its base and into the underside of the des...

Отзывы:

Нет отзывов