DNA desking
DD 1206/1406/1606/0808/1208/1408/1608/1808/
DD 2008/2208/2010/2210
DNA stand-alone desk
1 x DD----
1 x DSH (pair)
1 x DR 22/20/18/
16/14/12/08 (pair)
1 x DR 06/08/10
(pair)
6 mm Allen key
4 mm Allen key
Equipment Required
(not included)
Fixings
Take one of the corner legs and one of
the shorter rails (if you have a DD0808 or
DD 1616 all rails will be the same length
so start with any of them). With the holes
in the rail facing upwards, insert either
end of the rail onto one of the metal
lugs at the top of the leg. If the rail will
not slide on easily ensure that the bolts
in the lug are fully retracted by turning
them clockwise with the Allen key.
With the beam in place, put the Allen
key through one of the holes in the top
of the beam and into the Allen bolt in
the metal lug of the leg. Turn this
anti-clockwise
as if to undo the bolt.
This will raise the bolt up and force it
against the inside of the beam, locking
it in place. Repeat this with the bolt
directly next to the one you have just
turned.
2 x DCL (pairs)
8 x 6mm x 26mm
mush head screws