manualshive.com logo in svg

Verco DNA DD 1206, Инструкция по сборке, Страница: 2 / 4

Поделиться
Скачать
Verco DNA DD 1206 Скачать руководство пользователя страница 2

In the same way as the short beam 

place and fix the long beams in 

between the two structures. Place both 

beams before securing them in place 

as once one is in place the structure will 

be locked in place.

Remember to turn the bolts anti-

clockwise to fix the beams in place. 

Once complete check that all the 

beams are securely fastened to the 

legs.

Repeat this process with the remaining 

leg of the pair, fixing it to the other end 

of the beam. The result should resemble 

this illustration.

Repeat steps 1-3 with the remaining 

short beam and the other pair of legs. 

You should now have two identical 

structures.

Содержание DNA DD 1206

Страница 1: ...ing upwards insert either end of the rail onto one of the metal lugs at the top of the leg If the rail will not slide on easily ensure that the bolts in the lug are fully retracted by turning them clockwise with the Allen key With the beam in place put the Allen key through one of the holes in the top of the beam and into the Allen bolt in the metal lug of the leg Turn this anti clockwise as if to...

Страница 2: ...ce Remember to turn the bolts anti clockwise to fix the beams in place Once complete check that all the beams are securely fastened to the legs Repeat this process with the remaining leg of the pair fixing it to the other end of the beam The result should resemble this illustration Repeat steps 1 3 with the remaining short beam and the other pair of legs You should now have two identical structure...

Страница 3: ...ckaging Take one of the rectangular blocks and one of the hooks With the Verco and 100 DNASH text on the inside of the moulding facing up insert the hook in to the central hole as shown left The hook will not immediately fit through the hole You need to brace the block with both hands and push on the end of the hook where the arrow shows very firmly using your thumb The hook will pass though the h...

Страница 4: ...s not wobble Place the black mush head screws through the holes in each leg and screw them into the underside of the top using the 4mm Allen key Continue turning until the fully inserted but avoid over tightening This step is not essential You can fix the spacer hook into position by sliding it to the desired position and screwing through the two holes in its base and into the underside of the des...

Отзывы:

Нет отзывов