manualshive.com logo in svg

Verco DNA DD 1206, Инструкция по сборке, Страница: 3 / 4

Поделиться
Скачать
Verco DNA DD 1206 Скачать руководство пользователя страница 3

Lay the top on the floor, underside 

facing up (pilot holes facing up). Place 

the frame on top of it as shown and 

align the two oval shaped holes in each 

leg with the pilot holes in the top. Place 

the spacer hooks, one under each of 

the long beams, with the hooks facing 

towards the centre of the desk and the 

beam sitting in the shallow recess in the 

block.

Take all the spacer hook components 

(grey plastic) out of their packaging. 

Take one of the rectangular blocks and 

one of the hooks. With the ‘Verco’ and 

‘100-DNASH’ text on the inside of the 

moulding facing up, insert the hook in 

to the central hole as shown left.

The hook will not immediately fit through 

the hole. You need to brace the block 

with both hands and push on the end 

of the hook where the arrow shows 

very 

firmly 

using your thumb

. 

The hook will 

pass though the hole making a clearly 

audible ‘click’ as it does.

Now fully insert the top of the hook into 

the rectangular recces in the block as 

shown right. Push it fully in to the recess 

so the top is flush with the top of the 

block.

Содержание DNA DD 1206

Страница 1: ...ing upwards insert either end of the rail onto one of the metal lugs at the top of the leg If the rail will not slide on easily ensure that the bolts in the lug are fully retracted by turning them clockwise with the Allen key With the beam in place put the Allen key through one of the holes in the top of the beam and into the Allen bolt in the metal lug of the leg Turn this anti clockwise as if to...

Страница 2: ...ce Remember to turn the bolts anti clockwise to fix the beams in place Once complete check that all the beams are securely fastened to the legs Repeat this process with the remaining leg of the pair fixing it to the other end of the beam The result should resemble this illustration Repeat steps 1 3 with the remaining short beam and the other pair of legs You should now have two identical structure...

Страница 3: ...ckaging Take one of the rectangular blocks and one of the hooks With the Verco and 100 DNASH text on the inside of the moulding facing up insert the hook in to the central hole as shown left The hook will not immediately fit through the hole You need to brace the block with both hands and push on the end of the hook where the arrow shows very firmly using your thumb The hook will pass though the h...

Страница 4: ...s not wobble Place the black mush head screws through the holes in each leg and screw them into the underside of the top using the 4mm Allen key Continue turning until the fully inserted but avoid over tightening This step is not essential You can fix the spacer hook into position by sliding it to the desired position and screwing through the two holes in its base and into the underside of the des...

Отзывы:

Нет отзывов